Bearing Distributors Inc
  • Address1589 Tampines Industrial Distributor Avenue 5 Singapore 528759
  • Factory Address1589 Tampines Industrial Distributor Avenue 5 Singapore 528759
  • Worktime9.00--18.00
  • Phone(Working Time)0065-31591338
  • Phone(Nonworking Time)0065-31591338
  • Fax0065-31591338

Single Row Tapered Roller Bearings Inch

Contact Now

Single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e (→ product table): the larger the value of e, the larger the contact angle.
Bearing features
Low friction
The optimized roller end design and surface finish on the flange promote lubricant film formation, resulting in lower friction. This also reduces frictional heat and flange wear. In addition, the bearings can better maintain preload and run at reduced noise levels.

3/81